home *** CD-ROM | disk | FTP | other *** search
- this diskette contains 5 files :
- JETSET.DOC - this file
- JETSET.EXE - the compiled basic version of the
- take off overlay for jetset
- OJETCRUZ.EXE - the compiled basic version of the
- cruze overlay for jetset
- AJETSET.BAS - source for jetset.exe
- AJETCRUZ.BAS - source for ojetcruz.exe
-
- to run jetset, just execute JETSET.EXE from dos
-
- Jetset is a 747 flight simulator. It was originaly published
- in the November 1982 issue of BYTE magazine. You will realy
- need that article to do much with the program. The following
- is a breif outline of the commands and take off proceedure.
-
- The basic commands are as follows:
-
- F Thrust increase *
- S Thrust decrease *
- Q thrust reverse
- (up arrow on the numeric pad) Pitch down *
- (down arrow on the numeric pad) Pitch up *
- ,(<) Rudder left *
- .(>) rudder right *
- L Flaps (up/down switch)
- W wheels ditto
- B Brakes
- M missed approach
- V VOR frequency tune
- R radial select
- A VOR auto select
-
- To take off
-
- - Lower flaps (L)
- - Release the brakes (B)
- - Apply full throttle (F)
- - Steer down the runway (, and .)
- - When air speed reaches 150 press the down arrow on the numeric
- pad to raise the nose and take off
-
- To fly to Buffalo
- - Set VOR to 116.4
- - Set radial to 295
- - Fly north till you cross the radial
- - Follow it to Buffalo
-
- GOOD LUCK
-